Turbine handpieces with the friction chuck are used in therapeutic and orthopedic dentistry. It is used with all types of hard-alloy and diamond burs. The diameter of the shank of the instrument mounted therein is 1.6 mm. Autoclavable (135°C). In construction there are used two types of bearings with different separators. It is equipped with the built-in water-and-air system of cooling and can be used with Borden connection. Turbine handpiece NTS-300-TECH has a reduced level of noise and is supplied with changeable turbine.

Crown remover KS-TECH is used to remove crowns and metal prosthesis being previously cut down. It is light and easy in operation. Four working parts are available. The working surfaces are covered with protective coating.

The design of button type turbine handpiece NTSK-300-TECH is based on the recommendations of the dentists. Its construction is made of high quality materials and the precision-made bearings. The instrument is light and convenient in operation. The outer housing has a modern coating. Autoclavable (135°C). Replacement cartrige (Push button air turbine handpiece (Borden2) Replacement cartrige (Standard head air turbine handpiece)

Sealer NP UZK-TECH is designed to remove the calcareous deposits. Different working parts are available. The design was developed by Russian and foreign specialists. The product is made of high quality materials and has a long term of operation.

Straight and angular handpieces have a built-in two-line feeding system of cooling water and air. Autoclavable 135°C.

It is designed to perform works in dental laborotories.The number of revolutions is 30 000 rpm. The working instrument is secured by the rotation catch. They are used for securing rotating instruments and transmitting onto them the rotation from dental units equipped with hoses -The shrank of the instrument mounted therein has 2.35 mm diameter -The handpieces are supplied with the means of technical servicing

It is designed to perform therapeutic and orthopedic works.The number of revolutions is 30 000 rpm. The working instrument is secured by the rotation catch. The working head of the handpiece can be set in four positions. It has the external supply of the cooling mixture. They are used for securing rotating instruments and transmitting onto them the rotation from dental units equipped with hoses -The shrank of the instrument mounted therein has 2.35 mm diameter -The handpieces are supplied with the means of technical servicing

It is designed to perform therapeutic and orthopedic works.The number of revolutions is 30 000 rpm. The working instrument is secured by the rotation of the front portion of the handpiece counterclockwise.It is noted for the higher riliability and durability of the collet chuck. The technical servicing of the handpiece is simple in the course of its use. The outer housing has a modern coating that conforms to the requirements of European standards.. They are used for securing rotating instruments and transmitting onto them the rotation from dental units equipped with hoses -The shrank of the instrument mounted therein has 2.35 mm diameter -The handpieces are supplied with the means of technical servicing

The number of revolutions is 40 000 rpm. It is equipped with the built-in water-and -air system cooling. The level of noise is 65dB. They are designed for the operation from micromotors or dental units equipped with hoses. The shank of the instrument mounted therein has the 2.35 mm diameter. The handpieces are supplied with the means of technical servicing.

The number of revolutions is 30 000 rpm. The position of the head portion of the handpiece can be changed when working in the hard-to reach areas. It is equipped with the external system of cooling. The level of noise is 64 dB. They are designed for the operation from micromotors or dental units equipped with hoses. The shank of the instrument mounted therein has the 2.35 mm diameter. The handpieces are supplied with the means of technical servicing.